Sony MEXDV2200 - DVD/SACD/CD Receiver, Руководство по эксплуатации

Страница: 49 / 192

49
Setting the clock
The clock uses a 12-hour indication.
1
Press (SYSTEM SETUP) .
The system setup item appears on the main
unit.
2
Press
M
/
m
to select “CLOCK ADJ,”
then press (ENTER) .
The hour indication flashes.
3
Press M / m to set the hour and minute.
To move the digital indication, press < / , .
4
Press (ENTER) .
The setting is complete.
To hide the system setup display, press
(SYSTEM SETUP) .
To show the clock during playback, press
(DSPL)
repeatedly until it appears.
With the main unit
Press (SETUP) instead of (SYSTEM SETUP) , rotate
the control dial instead of pressing M / m , or press
(SEEK) +/– instead of < / , , then press the control
dial instead of (ENTER) .
Using Optional Equipment
Auxiliary equipment
You can connect auxiliary devices to the unit,
and listen on your car speakers. Up to 2 devices
can be connected, one to the AUX input jack
(stereo mini jack) on the front, and the other to
the BUS AUDIO IN/AUX AUDIO IN terminals*
on the rear. The volume level is adjustable for
any difference between the unit and the auxiliary
device.
* Unavailable when another optional device is
connected to the BUS CONTROL IN terminal. To
connect both an auxiliary device and optional
device, use the optional AUX-IN selector.
Connecting an auxiliary device
1 Turn off the auxiliary device.
2 Turn down the volume on the unit.
3 Connect to the unit.
On the front:
Connect to the AUX input jack.
* Be sure to use a straight type plug.
</M/m/,
ENTER
DSPL
SYSTEM
SETUP
continue to next page t
M/m
ENTER
SRC
MODE
SYSTEM
SETUP
AUX
Connecting cord
*
(not supplied)