Sony MEX-N6050BT, Руководство по эксплуатации

Страница: 23 / 56

23
GB
For your safety, do not reset the unit while you
are driving.
Radio reception
Stations cannot be received.
The sound is hampered by noises.

The connection is not correct.

If your car has built-in radio antenna (aerial) in
the rear/side glass, connect an REM OUT lead
(blue/white striped) or accessory power supply
lead (red) to the power supply lead of a car’s
antenna (aerial) booster.

Check the connection of the car antenna
(aerial).

If the auto antenna (aerial) will not extend,
check the connection of the power antenna
(aerial) control lead.

The tuning step setting has been erased.

Set the tuning step again (page 6).
Preset tuning is not possible.

The broadcast signal is too weak.
RDS
PTY displays [- - - - - - - -].

The current station is not an RDS station.

RDS data has not been received.

The station does not specify the program type.
CD playback
The disc does not play back.

Defective or dirty disc.

The CD-R/CD-RW is not for audio use (page 18).
MP3/WMA files cannot be played back.

The disc is incompatible with the MP3/WMA
format and version. For details on playable discs
and formats, visit the support site.
MP3/WMA files take longer to play back than
others.

The following discs take a longer time to start
playback.

A disc recorded with a complicated tree
structure.

A disc recorded in Multi Session.

A disc to which data can be added.
The sound skips.

Defective or dirty disc.
USB playback
You cannot play back items via a USB hub.

This unit cannot recognize USB devices via a USB
hub.
A USB device takes longer to play back.

The USB device contains files with a complicated
tree structure.
The sound is intermittent.

The sound may be intermittent at a high-bit-rate
of more than 320 kbps.
Application name is mismatched with the actual
application in App Remote.

Launch the application again from the “App
Remote” application.
NFC function
One touch connection (NFC) is not possible.

If the smartphone does not respond to the
touching.

Check that the NFC function of the smartphone
is turned on.

Move the N-Mark part of the smartphone
closer to the N-Mark part on this unit.

If the smartphone is in a case, remove it.

NFC receiving sensitivity depends on the device.
If One touch connection with the smartphone
fails several times, make BLUETOOTH connection
manually.
BLUETOOTH function
The connecting device cannot detect this unit.

Before the pairing is made, set this unit to pairing
standby mode.

While connected to a BLUETOOTH device, this
unit cannot be detected from another device.

Disconnect the current connection and search
for this unit from another device.

When the device pairing is made, set the
BLUETOOTH signal output to on (page 7).
Connection is not possible.

The connection is controlled from one side (this
unit or BLUETOOTH device), but not both.

Connect to this unit from a BLUETOOTH device
or vice versa.
The name of the detected device does not
appear.

Depending on the status of the other device, it
may not be possible to obtain the name.
No ringtone.

Adjust the volume by rotating the control dial
while receiving a call.

Depending on the connecting device, the
ringtone may not be sent properly.

Set [RINGTONE] to [1] (page 17).

The front speakers are not connected to the unit.

Connect the front speakers to the unit. The
ringtone is output only from the front speakers.