18
Listening to the radio
Tip
For details on other radio functions, see “Advanced Operations — Radio” on page 34.
With the card remote commander
Use
(SRC)
instead of
(SOURCE)
, and
.m
/
M>
instead of
(SEEK)
–/+.
1
Press
(SOURCE)
repeatedly until “TUNER” appears.
2
Press
(MODE)
repeatedly until the desired band (FM1, FM2, FM3,
AM1 or AM2) appears.
3
Perform tuning.
To tune automatically
Press
(SEEK)
–/
+.
Scanning stops when the unit receives a station. Repeat this procedure until the desired station
is received.
To tune manually
Press and hold
(SEEK)
–/
+ to locate the approximate frequency, then press
(SEEK)
–/
+
repeatedly to fine adjust to the desired frequency.
Z
X
Z
MODE
.m/M>
SRC
SEEK
MODE
SOURCE
B
A
A
Radio band/Function
B
Frequency