14
Basic Operations
Playing video discs
Depending on the disc, some operations may be different or restricted.
Refer to the operating instructions supplied with your disc.
To stop playback
Press
(OFF)
.
Note
Discs in DTS format are not supported. The sound is not output if the DTS format is selected.
1
Turn on your monitor, then select the
input source on your monitor
corresponding to this unit.
2
Press
(OPEN)
on the main unit.
3
Insert the disc (label side up).
4
Close the front panel.
Playback starts automatically.
If playback does not start automatically, press
u
.
5
If the DVD menu appears, press
(1)
(
b
)/
(2)
(
B
)/
(3)
(
V
)/
(4)
(
v
) to move
the cursor, then press
(6)
(
u
) to confirm.
With the card remote commander, press the
<
/
M
/
m
/
,
/number buttons to move the cursor,
then press
(ENTER)
to confirm.
Z
X
Z
PL
</M/m/,
ENTER
OFF
u
u
b/B/V/v
OFF
OPEN
Z
Number
buttons
