34
Using rear speakers as a
subwoofer — Rear Bass
Enhancer
Rear Bass Enhancer enhances the bass
sound by applying a low pass filter setting
(page 35) to the rear speakers. This function
allows the rear speakers to work as a
subwoofer if one is not connected.
1
During reception/playback, press the
select button.
2
Rotate the control dial until “RB ENH”
appears, then press it.
3
Rotate the control dial to select from
“1,” “2” or “3,” then press it.
4
Press
(BACK).
Adjusting setup items
1
Press and hold the select button.
The setup display appears.
2
Rotate the control dial until the desired
item appears, then press it.
3
Rotate the control dial to select the
setting, then press it.
*
The setting is complete.
4
Press
(BACK).
* For CLOCK-ADJ and BTM settings, step 4 is
not necessary. And for BT SIGNL and
PAIRING settings, step 3 and 4 are not
necessary.
The following items can be set depending
on the source and setting:
CLOCK-ADJ
(Clock Adjust) (page 7)
CT
(Clock Time)
Activates the CT function: “ON,” “OFF”
(page 12).
BEEP
Activates the beep sound: “ON,” “OFF.”
CAUT ALM
(Caution Alarm)*
1
Activates the caution alarm: “ON,”
“OFF” (page 7).
AUX-A
(AUX Audio)*
1
Activates the AUX source display: “ON,”
“OFF” (page 36).
AUTO OFF
Shuts off automatically after a desired
time when the unit is turned off: “NO,”
“30S (Seconds),” “30M (Minutes),” “60M
(Minutes).”
DEMO
(Demonstration)
Activates the demonstration: “ON,”
“OFF.”
