Sony MEU-WX1, Руководство по эксплуатации

Страница: 23 / 34

Adjustment Using the Menus
23
USER CONTROL menu
The USER CONTROL menu is used for adjusting the
picture.
Items that cannot be adjusted depending on the input
signal are displayed in blue.
When selecting an input other than COMPUTER
Submenu Setting
AUTO CHROMA/
PHASE Adjusts color intensity (CHROMA)
and tones (PHASE).
•
AUTO ADJ VALUE : Selects
ON or OFF of the Auto
adjustment. When set to
OFF, this parameter is reset
to the factory setting. When
set to ON, the automatically
adjusted value is enabled.
• START... : Display the color bar
signals (Full/SMPTE/EIA)
on the screen and press
ENTER. The auto
adjustment function starts.
After the adjustment is done
correctly, the AUTO ADJ
VALUE is automatically set
to ON.
The auto adjustment is
stopped by pressing the
MENU or RESET button
during the auto adjustment
operation.
A U T O C H R O M A / P H A S E
x A U T O A D J VA L U E xx
· S TA R T · · ·
U S E R C O N T R O L ( 1 / 3 ) R r
S U B C O N T R O L
x C O N T R A S T x
· B R I G H T x
· C H R O M A x
· P H A S E x
U S E R C O N T R O L ( 2 / 3 ) R r
P I C T U R E C O N T R O L
x A C C xxx
· C T I x
· V S H A R P N E S S
x
I N P U T S E T T I N G
· S H I F T H
xxx
· S H I F T V xx
U S E R C O N T R O L ( 3 / 3 )
R r
SUB CONTROL You can finely adjust the
adjustment range of the following
controls on the front panel;
CONTRAST, BRIGHT, CHROMA
and PHASE controls.
•
CONTRAST : Adjusts the picture
contrast.
• BRIGHT : Adjusts the picture
brightness.
• CHROMA : Adjusts color
intensity. The higher the
setting, the greater the
intensity. The lower the
setting, the lower the
intensity.
• PHASE : Adjusts color tones.
The higher the setting, the
more greenish the picture.
The lower the setting, the
more purplish the picture.
For details of input signals and
adjustable/setting items, see
page 13.
PICTURE CONTROL You can adjust the picture.
•
ACC (Auto Color Control): Sets
ACC circuit on or off.
To check the fine
adjustment, select OFF.
Normally select ON.
• CTI (Chroma Transient
Improvement) : When a low
color resolution signal is
input, a crisp image can be
displayed. When the setting
is higher, the picture
becomes even more crisp.
• V SHARPNESS : A crisp image
can be displayed. When the
setting is higher, the picture
becomes even more crisp.
INPUT SETTING • SHIFT H : Adjusts the position of
the picture. As the setting
increases, the picture moves
to the right, and as the
setting decreases, the picture
moves to the left.
• SHIFT V : As the setting
increases, the picture moves
up, and as the setting
decreases, the picture moves
down.
Submenu Setting