Wireless Stereo Headset
MDR-ZX770BT
Listening to music from a device connected via BLUETOOTH
You can enjoy listening to music and basic remote control operation of a BLUETOOTH device via a BLUETOOTH
connection. The BLUETOOTH device is required to support the following BLUETOOTH profiles.
A2DP (Advanced Audio Distribution Profile):
enables you to enjoy high-quality audio content wirelessly.
AVRCP (Audio Video Remote Control Profile):
enables you to adjust volume, etc.
The operation may vary depending on the BLUETOOTH device. Refer to the operating instructions supplied with your
BLUETOOTH device.
1. Connect the headset to a BLUETOOTH device.
2. Wear the headset.
Adjust the length of the headband.
Put the headset with indication on your left ear and indication on your right ear. The unit of the headset
has a tactile dot.
A:
Tactile dot
3. Play back music or video on the BLUETOOTH device.
Adjust the volume on the BLUETOOTH device.
4. Adjust the volume by pressing the VOL +/- buttons of the headset.
Note
If the communication condition is poor, the BLUETOOTH device may react incorrectly to the operation on the headset.
Hint
The headset supports SCMS-T content protection. You can enjoy music, etc., from a device such as a mobile phone
How to Use
75
Downloaded from