Wireless Stereo Headset
MDR-ZX770BT
Connecting to a paired BLUETOOTH device
1. Turn on the headset.
Press and hold the POWER button for about 2 seconds.
Make sure that the indicator (blue) flashes after you release the button.
Check the connection status on the BLUETOOTH device. If not connected, proceed to step 2.
2. Make the BLUETOOTH connection from the BLUETOOTH device.
For details, refer to the operating instructions supplied with your BLUETOOTH device.
Hint
The above procedure is an example. For details, refer to the operating instructions supplied with your BLUETOOTH
device.
If the BLUETOOTH device was connected with the headset the last time, an HFP/HSP connection is made when you
turn on the headset. While the headset is on, you can make an A2DP connection (music playback) by pressing the
button.
Note
If the headset tries to make a connection with a previously connected BLUETOOTH device, you may not be able to
connect to the device you want to. If connection fails, terminate the BLUETOOTH connection from the device that was
previously connected.
How to Use
68
Downloaded from
