MDR-XB90EX / MDR-XB60EX
Stereo Headphones
Operating Instructions
使用說明書
4-429-300-
22
(1)
©2012 Sony Corporation
Printed in China
About noise isolation earbuds
Supplied noise isolation earbuds provide a snug fit for
effective attenuation of ambient noise.
Notes
Prolonged use of snugly fitting earbuds may strain
your ears. If you experience discomfort, discontinue
use.
The pressure-relieving urethane cushion is extremely
soft. If it breaks or detaches from the earbuds, it will
not take its correct position and the earbuds will lose
their noise isolation function.
The urethane cushion may deteriorate over time. If
the pressure-relieving power is lost and the urethane
cushion hardens, the earbuds may lose their noise
isolation function.
Do not wash the earbuds. Keep them dry, otherwise
they may deteriorate quickly.
About hybrid silicone rubber earbuds
Keep earbuds clean. To clean the earbuds, wash them
with a mild detergent solution.
Removing the headphones
After use, remove the headphones slowly.
Note
Headphones are designed to fit closely in your ears. If the
headphones are pressed hard while in use or taken off
too quickly, they may cause injury.
Wearing headphones may produce a diaphragm click
sound. This is not a malfunction.
Precautions
High volume may affect your hearing.
For traffic safety, do not use while
driving or cycling.
Install the earbuds firmly. If an earbud
accidentally detaches and is left in your
ear, it may cause injury.
Do not leave the stereo headphones in a location
subject to direct sunlight, heat or moisture.
Note on static electricity
Static electricity accumulated in the body may cause
mild tingling in your ears.
To minimise the effect, wear clothes made from natural
materials.
English
Stereo headphones
Specifications
MDR-XB90EX
Type: Closed, dynamic
Driver unit: 16 mm, dome type (CCAW adopted)
Power handling capacity: 200 mW (IEC
*
)
Impedance: 16 Ω at 1 kHz
Sensitivity: 106 dB/mW
Frequency response: 4 Hz – 27,000 Hz
Cord: 1.2 m, Litz cord (Y-type)
Plug: Gold-plated L-shaped stereo mini plug
Mass: Approx. 9 g without cord
Supplied accessories
Hybrid silicone rubber earbuds: SS (red) (2), S (orange)
(2), M (green) (attached to the unit at the factory) (2),
L (light blue) (2) / Noise isolation earbuds: S (orange)
(2), M (green) (2), L (light blue) (2) / Clip (1) / Carrying
case (1)
MDR-XB60EX
Type: Closed, dynamic
Driver unit: 13.5 mm, dome type (CCAW adopted)
Power handling capacity: 100 mW (IEC*)
Impedance: 16 Ω at 1 kHz
Sensitivity: 105 dB/mW
Frequency response: 4 Hz – 25,000 Hz
Cord: 1.2 m, Litz cord (Y-type)
Plug: Gold-plated L-shaped stereo mini plug
Mass: Approx. 8 g without cord
Supplied accessories
Hybrid silicone rubber earbuds: SS (red) (2), S (orange)
(2), M (green) (attached to the unit at the factory) (2),
L (light blue) (2) / Noise isolation earbuds: S (orange)
(2), M (green) (2), L (light blue) (2) / Clip (1) / Carrying
pouch (1)
*
IEC = International Electrotechnical Commission
Design and specifications are subject to change
without notice.
Optional replacement earbuds can be ordered from
your nearest Sony dealer.
How to use
Hybrid silicone rubber earbuds
Noise isolation earbuds
L
M
L
M
S
S
SS
Pressure-relieving
urethane cushion
Clip
Earbuds
Red mark
Tactile dot
