Sony MD Walkman MZ-R70 Скачать руководство пользователя страница 55

Страница: 55 / 76

Using on a battery

The recorder accepts either a rechargeable nickel cadmium battery
(supplied) or an LR6 (size AA) alkaline dry battery.
Be sure the rechargeable battery is fully charged.

Insert either a fully charged nickel cadmium rechargeable battery
or a LR6 (size AA) alkaline dry battery with correct polarity.

When to replace the battery

When the dry battery or rechargeable battery is weak, flashing

“LOW BATT” appears in the display. Replace the dry battery or
charge the rechargeable battery.
The battery level indicator is approximate.

Note

Stop the recorder before replacing battery.

Battery life

The battery life may be shorter due to operating conditions and the
temperature of the location.

Batteries

Recording

When you record, use a fully charged rechargeable battery.

Playback

NC-WMAA nickel cadmium
rechargeable battery

Approx.
3 hours

Approx.
6.5 hours

LR6 (size AA)
Sony alkaline dry battery

When using a LR6 (SG) Sony “STAMINA” alkaline dry battery (produced in
Japan).

Approx.
3 hours

Recording time may differ according to the alkaline batteries.

Approx.
17 hours

Содержание MD Walkman MZ-R70













































































Результаты поиска

Содержание MD Walkman MZ-R70

Отзывы:

Sony MD Walkman MZ-R70, Руководство по эксплуатации, Страница: 55 / 76

Результаты поиска

Содержание MD Walkman MZ-R70

Отзывы: