Sony MCC-1000MD, Инструкция по эксплуатации

Страница: 52 / 61

52
You can connect the foot switch to the remote
contact switch connector 1 to 2 on the rear CCU
panel to use functions on this unit. You can
connect up to two foot switches.
Connect the foot switch to remote contact switch
connector 1 or 2 while the unit is turned off.
Caution
The FS-24 has an Ingress Protection rating of
IPX3. Therefore, do not operate it environments
exposed to splashing liquids (e.g., surgical
operating rooms).
For safety, use a device with a rating of IPX6 or
higher when operating in such environments.
Remote contact switch connectors 1 and 2
Connector specifications (stereo mini jack)
Set the functions to use with the foot switch.
For details on the function controlled by the foot
switch, see “[System] menu” (page 50).
1
Press the MENU button.
The menu screen will appear.
2
In the [System] menu, select [Remote 1]
or [Remote 2] and press the ENTER
button.
When connected to remote contact switch
connector 1, select [Remote 1], and when
connected to remote contact switch
connector 2, select [Remote 2].
3
Select the functions to use with the foot
switch, and then press the ENTER
button.
4
When two foot switches are connected,
select functions to use with the second
foot switch as well.
5
Once settings are complete, press the
MENU button to close the menu
screen.
System Operation Examples
Using the Foot Switch
Connecting the foot switch
FS-24 Foot Switch
Set the functions to use