masterpage:Right
filename[D:\nakano's\3061389111\3061389111MVCFD95UC\02GB-
MVCFD95UC\07adv.fm]
BBBB
V
a
rious
reco
rd
ing
39
model name1[MVC-FD95]
[3-061-389-11(1)]
Focusing manually
Normally the focus is automatically
adjusted. The manual focus function is
convenient to focus the subject under
dark situations.
To reactivate auto focusing
Set the FOCUS AUTO/MANUAL
switch to AUTO.
Notes
•
Focal point information may not
completely show the correct distance. Use
the information as a guide.
•
Focal point information does not show the
correct distance when attaching the
conversion lens.
•
If you shoot a subject within 0.8 m
(31 1/2 inches) while the zoom lever is set
to T side, you cannot get a clear focus. In
such cases, the focal point information
flashes. Move the zoom lever to the W side
until the indicator stops flashing.
•
You cannot adjust the focus manually if
you have selected the Panfocus mode in
the PROGRAM AE function.
1
Set the PLAY/STILL/MOVIE
selector to MOVIE or STILL.
2
Set the FOCUS AUTO/
MANUAL switch to MANUAL.
The
9
(manual focus) indicator
appears on the LCD screen or on
the finder.
3
Turn the focus ring to achieve
a sharp focus.
When you shoot still images, the
image on the LCD screen or on the
finder is enlarged (double*) and
the focal point information appears
while the focus is being adjusted.
After adjusting, the image returns
to normal size. The range is from
2 cm (13/16 inch) to
∞
(infinity).
∗
When using the digital zoom
function, the enlarged image will be
less than double size.
3
2
1
01cov.book Page 39 Thursday, March 9, 2000 10:26 AM
