manualshive.com logo in svg

Sony LocationFree LF-X11, Руководство по эксплуатации, Страница: 20 / 96

Поделиться
Скачать
Sony LocationFree LF-X11 Скачать руководство пользователя страница 20

F:\M_K\SONY\5051480_LF-
X11_OI\2655608111\2655608111\2655608111_LF-X11\00GB05C01-WW.fm

masterpage: Left

LocationFreeTV

2-655-608-11(1)

20

Connect the power cord when you finish making 
all other connections.

1

Place the Monitor on a soft cloth with the 
LCD screen face down.

2

From the top of the compartment (

1

), slide 

the battery in as far as it will go (

2

). Keep 

the Monitor stand closed when inserting the 
battery.

Notes

• Insert the battery so that the side with the 

symbol faces upward.

• Insert the battery until you hear it click.

Turning On the 
Power

Connecting the Power Cord to 
the Base Station

Note

• Use only the supplied AC power adapter (AC-

LX1B).

• Do not bundle the Base Station AC power 

adapter cord and the antenna cable (not supplied) 
together. Doing so may interfere with your 
television reception.

Connect the power cord to the Base 
Station AC power adapter (AC-LX1B), 
and the AC power adapter to the DC IN 
jack on the Base Station, then plug the 
power cord into a wall outlet.

Base Station rear panel

Wall outlet

Power cord (supplied)

AC-LX1B AC power 
adapter (supplied).

To DC IN

Ferrite core
Do not remove the 
ferrite core.

Inserting the Battery

Symbol

Содержание LocationFree LF-X11

































































































Отзывы:

Нет отзывов