18
Attaching an Input Board
Attaching an Input Board
Attaching an optional input board to the input board slot on
the unit allows input of a signal source from external
equipment.
One input board can be installed in the unit.
1
Loosen the two screws fully and remove the panel on
the input board slot.
2
Push in the input board along the rails.
3
Tighten the two screws firmly with a torque of 0.8±0.1
N•m.
To remove the input board, loosen the two screws fully and
pull it out.
Note
OUT
IN
OUT
IN
