Sony LMDDM20C, Инструкция по эксплуатации

Страница: 15 / 31

Removing the Connector Cover / Connecting the Cables
15
Removing the
Connector Cover
1
Unlock the slide latch on the connector cover.
2
Slide the connector cover to the side to remove.
Connecting the Cables
1
Turn off the computer.
2
Connect the supplied DVI cable between the unit’s
DIGITAL (DVI input) connector and the
computer’s DVI output connector.
Note
Use the supplied DVI cable only. Otherwise,
resolution loss may occur.
When using a DisplayPort cable, connect the
DisplayPort cable between the unit’s DisplayPort
connector and the computer’s DisplayPort
connector.
Note
The recommended cable length is 2 m (6.6 feet) or
less. If you use a long cable, the display may
become unstable and flicker.
3
Connect the supplied power cable between the AC
IN socket and the wall outlet.
4
Turn on the unit and the computer.
Note
When using the optional calibration kit, connect the
supplied USB cable between the unit’s UP port and the
computer’s USB port. For details about connections,
refer to the instruction manual for the calibration kit.
Slide latch
Connector
cover
Rear of the unit
DVI cable (supplied)
or DisplayPort cable
Computer
To the wall outlet