Adjustment Using the Menus
20
[Input Setting]
[Function Button Setting]
About the function assigned to the function
button
[Marker]
Press the button to display the marker. Set the marker in
the [Marker Setting] menu (see page 22).
[Focus Assist]
Press the button to confirm the camera focus. An image
with sharpened edges is displayed. Set the camera focus
in [Focus Assist Setting] (see page 23).
[Focus Gain]
Press the button to display the adjustment screen and
adjust the level of edge sharpening. Press again to hide
the adjustment screen. However, the level of edge
sharpening remains adjustable. Turn the menu selection
control right to increase the edge sharpening, or left to
decrease it.
[Side by Side]
Press the button to display the two inputs of the SDI
signal in the same screen side by side.
Submenu
Setting
[Language]
Selects the menu or message language
from among seven languages.
[English]:
English
[Français]:
French
[Deutsch]:
German
[Español]:
Spanish
[Italiano]:
Italian
[
]:
Japanese
[
]:
Chinese
[LED Brightness]
Selects the brightness of the indicator’s
LED of the buttons and power switch.
[High]:
The LED becomes brighter.
[Low]:
The LED becomes darker.
[Format Display]
Selects the display mode of the signal
format.
[Auto]:
The format and scan mode
are displayed for about five
seconds when the input of the
signal starts.
[Off]:
The display is hidden.
[Power Saving]
Sets the power saving mode to [On] or
[Off]. When you set to [On], the
monitor goes into power saving mode if
no signal is input for about one minute.
While the unit is in power saving mode,
the currently-set input select button
flashes.
When a source name or tally
information is input, a front panel
button is pressed, or a parallel or serial
remote command is input, the unit exits
the power saving mode.
[User Reset]
Returns to the factory default setting
except for the following:
Color temperature for [User1]
Color temperature for [User2]
Language setting
[Cancel]:
Cancels the reset.
[Confirm]:
Resets the unit. When the
reset finishes, this unit restarts.
Submenu
Setting
[DVI RGB Range]
Sets the black level and white level for
the RGB format of DVI input.
[Limited]:
[16] (black level) to [235]
(white level)
[Full]:
[0] (black level) to [255] (white
level)
[HDMI RGB Range]
Sets the black level and white level for
the RGB format of HDMI input.
[Auto]:
Switches [Limited] or [Full]
automatically according to the
AVI info of the HDMI signal.
[Limited]:
[16] (black level) to [235]
(white level)
[Full]:
[0] (black level) to [255] (white
level)
[SDI Payload ID
Detect]
[On]:
Detects the payload ID which is
added on the SDI signal.
[Off ]:
The payload ID is not used.
Submenu
Setting
[F1] to [F7]
Assigns the function to the function
buttons of the front panel and turns the
function on or off.
The [Function Button Setting] menu
can also be displayed by pressing and
holding the function button, and the
setting can be changed. Note that you
cannot move to the other menu.
Submenu
Setting
Содержание lmd-b170
Страница 39: ...Sony Corporation ...
