Sony LMD-2451MT, Инструкция по эксплуатации

Страница: 72 / 207

Selecting the Default Settings
72
Selecting the Default
Settings
When you turn on the unit for the first time after
purchasing it, select the area where you intend to use this
unit from among the options.
The default setting values for each area
1
Turn on the unit with the / (power) switch on
the bottom panel.
The SELECT SETTING screen appears.
2
Press the CONTROL button.
3
Press the
+
or – button to select the area where you
intend to use the unit and press the ENTER button.
If you select either
1
,
3
or
5
The confirmation screen is displayed. Confirm the
selected area. When the setting is wrong, press the
RETURN button to return to the previous screen.
If you select either
2
or
4
One of the following screens appears. Press the
+
or – button to narrow the area further and then press
the ENTER button.
The confirmation screen is displayed. Confirm the
selected area. When the setting is wrong, press the
RETURN button to return to the previous screen.
3
3
4
5
3
1
2
COLOR
TEMP
COMPONENT
LEVEL
NTSC
SETUP
1 NORTH
AMERICA
LOW BETA7.5 7.5
2 LATIN AMERICA
PAL&PAL-N
AREA
ARGENTINA LOW SMPTE 0
PARAGUAY LOW SMPTE 0
URUGUAY LOW SMPTE 0
NTSC&PAL-M
AREA
OTHER AREA LOW BETA7.5 7.5
3 AFRICA AUSTRALASIA
EUROPE MIDDLE-EAST
LOW SMPTE 0
4
ASIA EXCEPT
JAPAN
NTSC AREA LOW BETA7.5 7.5
PAL AREA LOW SMPTE 0
5 JAPAN HIGH SMPTE 0
–
+
–
+
–
+
–
+
–
+
–
+
3~4
1
2
S E L E C T S E T T I N G
N O R T H A M E R I C A
L A T I N A M E R I C A
A F R I C A A U S T R A L A S I A
E
A S I A E X C E P T J A P A N
J A P A N
1 North America
2
Latin America
3
Africa Australia/New
Zealand, Europe,
Middle East, Russia
4
Asia Except Japan
5 Japan
S E L E C T T H I S A R E A ?
[ E N T E R ] Y E S
[ R E T U R N ] NO
N O R T H A M E R I C A