31
GB
B
a
si
c Op
er
a
tio
ns
Creating a party
atmosphere
— X-TRANCE
You can create a party atmosphere by
using X-TRANCE.
Notes
• The FLANGER, DELAY or CHORUS sound
effect is automatically turned off when you:
– turn off the system.
– change the function.
– select other
sound
effect.
• If you activate FLANGER, DELAY or
CHORUS during recording/transferring, the
sound effect will be recorded onto the tape or
transferred onto the USB device. However,
these sound effect will not be transferred onto
the USB device during CD function.
Changing the display
1
Press OPTIONS.
2
Turn OPERATION DIAL to select
the item you want, then press
ENTER
The last selected item setting appears
in the display.
ILLUM
Change the illumination pattern
around MASTER VOLUME.
METER BACKLIGHT
Change the meter backlight pattern.
METER POINTER
Change the meter pointer pattern.
DISPLAY
Change the front panel display pattern.
3
Turn OPERATION DIAL to select
the setting you want.
4
Press ENTER.
5
Repeat steps 2 to 4 to make
other settings.
To exit the OPTIONS menu
Press OPTIONS again.
To
Do this
Flash the sound
output
(The sound cuts
off periodically)
Hold down SOUND
FLASH during playback.
To cancel the effect,
release SOUND FLASH.
Change the
sound flash
speed (1~20)
Hold down SOUND
FLASH and turn
OPERATION DIAL.
Create a deep
flanging effect
that is similar to
the roar of a jet
plane
Press FLANGER
repeatedly to select
“FLANGER ON”.
Create a “live”
sound with full
characteristic
reverb effect
Press DELAY repeatedly
to select “DELAY ON”.
Create a slow
and deep chorus
effect
Press CHORUS
repeatedly to select
“CHORUS ON”.
