background image

To parents/guardians

Electronic products can lead to a fire or personal injury if not used under 

safety instructions.

This leaflet contains important instructions to prevent accidents. Please read the instructions carefully 

and use this product safely. Please keep this leaflet handy for future reference.

FCC CAUTION

 

Changes or modifications not expressly 

approved by the party responsible for 

compliance could void the user’s authority 

to operate the equipment.

This equipment has been tested and found 

to comply with the limits for a Class B 

digital device, pursuant to part 15 of the FCC 

Rules. These limits are designed to provide 

reasonable protection against harmful 

interference in a residential installation. 

This equipment generates, uses and can 

radiate radio frequency energy and, if not 

installed and used in accordance with the 

instructions, may cause harmful interference 

to radio communications. However, there 

is no guarantee that interference will not 

occur in a particular installation.

WARNING:

Let's get started!

Basic User Guide

Registration

https://www.sony.com/koov/resources

This transmitter must not be co-located 

or operated in conjunction with any other 

antenna or transmitter.

For question regarding your product or for 

the Sony Service Center nearest you, call 

1-866-935-7669 in the United States.
Supplier’s Declaration of Conformity

Trade Name : SONY 

Model : EKV-100U

Responsible Party : Sony Electronics Inc. 

Address : 16535 Via Esprillo, San Diego, CA 

92127 U.S.A. Telephone Number : 1-858-

942-2230

Caution Exposure to radio frequency 

radiation 

This equipment complies with FCC radiation 

exposure limits set forth for an uncontrolled 

environment and meets the FCC radio 

frequency (RF) Exposure Guidelines. This 

equipment has very low levels of RF 

energy that is deemed to comply without 

maximum permissive exposure evaluation 

(MPE).

If this equipment does cause harmful 

interference to radio or television reception, 

which can be determined by turning 

the equipment off and on, the user is 

encouraged to try to correct the interference 

by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the 

equipment and receiver.

--Connect the equipment into an outlet on 

a circuit different from that to which the 

receiver is connected.

--Consult the dealer or an experienced 

radio/TV technician for help.

This device complies with part 15 of the 

FCC rules. Operation is subject to the 

following two conditions: (1) This device 

may not cause harmful interference, and 

(2) this device must accept any interference 

received, including interference that may 

cause undesired operation.

Содержание KOOV

Страница 1: ...arding your product or for the Sony Service Center nearest you call 1 866 935 7669 in the United States Supplier s Declaration of Conformity Trade Name SONY Model EKV 100U Responsible Party Sony Electronics Inc Address 16535 Via Esprillo San Diego CA 92127 U S A Telephone Number 1 858 942 2230 Caution Exposure to radio frequency radiation This equipment complies with FCC radiation exposure limits ...

Страница 2: ...Turn off this unit and other Bluetooth devices in the following locations as it may cause an accident where inflammable gas is present in a hospital or a petrol station near automatic doors or a fire alarm Do not use the unit on an airplane Radio waves may affect instruments causing an accident due to malfunction Keep out of reach of small children It may lead to accidental swallowing Please consu...

Страница 3: ...Half C Base Tray x 4 x 4 White Cube Eye x 4 Orange Half D x 12 x 4 Red Cube 360 Connector x 4 Purple Half D x 4 x 8 Yellow Half A Yellow Prism x 4 Wheel x 12 x 2 Blue Half C Purple Beam 20cm x 3 Electronic parts x 8 x 4 Yellow Half B Blue Prism Block Remover x 1 x 1 x 1 x 1 Green LED Red LED Buzzer What s inside the box ...

Страница 4: ...ensor blocks light sensor push switch IR photoreflector and accelerometer here Output port Connect the motor blocks DC motor servo motor LEDs and buzzers here 1 Interoperability and compatibility among Bluetooth devices vary 2 Batteries not included USB port Battery box How to install batteries Remove the screw with a cross head screwdriver Place the batteries in Make sure to put them in the right...

Отзывы: