F:\SONY STM\Sony STM 2009 Jobs\Grp S1\JC090195_4135850121 Grp
S1 GB Rev 2\4135850121\080MEN.fm
masterpage:Left
28
GB
KLV-52/46/40/32V550A/40/32V530A/40S550A
4-135-850-
12
(1)
4:3 Default
Sets the default Wide Mode for 4:3 broadcasts.
Wide Zoom
Enlarges the 4:3 picture to fill the 16:9 screen, keeping the
original image as much as possible.
Normal
Displays conventional 4:3 broadcasts in the correct
proportion.
Off
Uses the setting that you specified in “Wide Mode”.
Display Area
Adjusts the picture display area.
Auto
Automatically switches to the most appropriate display area.
Full Pixel
Displays the picture for 1080/50i, 1080/60i, 1080/50p and
1080/60p sources (HDMI or component input only) or 1080/
24p sources (HDMI input only) in the original size.
+1
Displays pictures in their original size.
Normal
Displays pictures in their recommended size.
-1/-2
Enlarges the picture so that the edges are outside the visible
display area.
Horizontal Shift
Adjusts the horizontal position of the picture.
Vertical Shift
Adjusts the vertical position of the picture when “Wide Mode” is set to “Wide
Zoom” or “Zoom”.
Vertical Size
Adjusts the vertical size of the picture when “Wide Mode” is set to “Wide Zoom”.
Screen (for PC input)
Auto Adjustment
Automatically adjusts the display position, phase, and pitch of the picture when the
TV receives an input signal from the connected PC.
z
• “Auto Adjustment” may not work well with certain input signals. In such cases,
manually adjust “Phase”, “Pitch”, “Horizontal Shift”, and “Vertical Shift”.
Reset
Resets all PC screen settings to factory settings.
Phase
Adjusts the phase when the screen flickers.
Pitch
Adjusts the pitch when the picture has unwanted vertical stripes.
Horizontal Shift
Adjusts the horizontal position of the picture.
Vertical Shift
Adjusts the vertical position of the picture.
Wide Mode
Sets “Wide Mode” for displaying pictures from your PC.
Normal
Displays the picture in its original size.
Full 1
Enlarges the picture to fill the vertical display area, while
maintaining its original proportion.
Full 2
Enlarges the picture to fill the display area.
Video Settings
Colour System
Sets the colour system (“Auto”, “PAL”, “SECAM”, “NTSC3.58” or “NTSC4.43”)
according to the input signal from the input source.
