Sony KLV-32W400A, Руководство по эксплуатации

Страница: 35 / 40

35
GB
Usi
ng Men
u
Fun
ct
ion
s
Programme Block
Blocks an individual channel from being watched.
1 Press
F
/
f
to select the channel you want to block, then press .
2 Press
F
/
f
to select “Block”, then press .
To watch the channel, select “Allow”.
Intelligent Picture
“On with Indicator”: Automatically reduces the picture noise. The signal level bar
is displayed when the channel is changed or the display is changed from an input
screen to a TV programme.
“On”: Automatically reduces the picture noise.
“Off”: Turns off the “Intelligent Picture” feature.
Manual Programme
Preset
Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“Colour System”/“Signal
Booster”, press PROG +/– to select the programme number with the channel. You
cannot select a programme number that is set to “Skip” (page 36).
Programme/TV System/VHF or UHF
Presets programme channels manually.
1
Press
F
/
f
to select “Programme”, then press .
2
Press
F
/
f
to select the programme number you want to manually tune (if
tuning a VCR, select channel 00), then press .
3 Press
F
/
f
to select “TV System”, then press .
4 Press
F
/
f
to select the best received TV broadcast systems, then press
.
5
Press
F
/
f
to select “VHF Low”, “VHF High” or “UHF” then press .
6
Press
G
/
g
until the desired channel’s broadcast appears on the TV
screen, then press .
Repeat the procedure above to preset other channels manually.
Label
Assigns a name of your choice, up to five letters or numbers, to the selected channel.
This name will be displayed briefly on the screen when the channel is selected.
To input characters, follow steps 2 to 4 of “Programme Labels” (page 34).
AFT
Allows you to fine-tune the selected programme number manually if you feel that a
slight tuning adjustment will improve the picture quality.
You can adjust the fine tuning over a range of –15 to +15. When “On” is selected,
the fine tuning is performed automatically.
Audio Filter
Improves the sound for individual channels in the case of distortion in mono
broadcasts. Sometimes a non-standard broadcast signal can cause sound distortion or
intermittent sound muting when watching mono programmes.
If you do not experience any sound distortion, we recommend that you leave this
option set to the factory setting “Off”.
~
You cannot receive stereo or dual sound when “Low” or “High” is selected.
Continued