KDL-60W855B/70W855B 18
SECTION 3 - REPAIR INFORMATION
5. Release 6 hooks on the sequence shown by pulling apart the Bottom
Cover to access the HSC2 Board.
1
2
3
4
5
6
1
2
3
4
5
6
6. Unclamp 2 side clips from the HSC2 Board and lift as shown to detach.
HSC2 Board
HSC2 Board
7.
Release 4 hooks to remove the back cover from the front cover.
Locate and unclamp the side clips to detach the BT Module and
Wireless LAN Card.
Wireless
LAN Card
Wireless
LAN Card
BT Module
BT Module
REMOVING THE SMART CORE BLOCK
1.
Disconnect 2 connectors from Smart Core Block.
2.
Locate and remove 2 screws.
3.
Grasp Smart Core Block and carefully pull upwards, then disconnect
Harness to detach from Panel.
Smart Core Block
Smart Core Block
4.
Pull Bottom Cover on the direction shown to detach from Top Cover.
Bottom Cover
Bottom Cover
Top Cover
Top Cover
