Sony KDL-60R550A, Руководство по эксплуатации

Страница: 89 / 120

31
GB
Using
Me
nu F
unc
tions
Listening to the FM Radio
You are able to listen to the FM radio stations using your TV by connecting an antenna (page 6). FM
Radio tuning range is from 87.5-108.0 MHz.
When you use the FM Radio function for the first time, press
HOME and select “FM Radio”, then perform
“Auto Tuning” in the “FM Radio Set-up” menu (page 46).
To Do this
Access to FM Radio mode Press HOME and select “FM Radio”.
Exit from FM Radio mode Press RETURN to go back to previous view input.
Listen to preset stations
1
Access to FM Radio mode.
2
Press HOME and select “Settings”. Preset the desired FM radio stations and
its labels in “FM Radio Set-up” from “Channel Set-up” menu (page 46).
• You can also access to “FM Radio Presets” by selecting “FM Radio Presets”
from the Options menu in FM Radio mode.
3
Exit from “Channel Set-up” menu by pressing HOME . The selected preset FM
radio station number and label will appear on the screen. To select the
desired preset FM radio station, press
PROG +/– .
• You can also use the 0-9 buttons on the remote to directly select the desired
preset FM radio station.
Listen to non-preset stations
1
Access to FM Radio mode.
2
Press F / f to manually search for the desired FM radio station. It will search
and stop when found the next available station.
• You can also tune FM frequency for the desired FM radio station by pressing
G
/
g
. The available radio frequency is only for temporary listening pleasure
and cannot be stored in the memory.
• If the message “Please set-up FM Radio.” appears, display the “Channel Set-
up” menu and select “FM Radio Set-up” to preset the desired FM radio
stations (page 46).
Show photo frame while
listening to FM Radio
1
Press OPTIONS to select “Photo Frame Mode”, then press .
2
Refer to “Photo Frame” (page 29) to select photo or “Display Mode”.
• BRAVIA image will be displayed if a USB device is not connected.
Reduce power consumption
while in FM Radio mode
1
Press OPTIONS to select “Power Saving”. Select the desired options and
press .
• You can also access to “Power Saving” by selecting “Eco” from the setting
menu (page 51).
2
Exit from “Picture Off” by pressing any key on the remote except 2 +/– or % .
• If the station has a noisy sound, you may be able to improve the sound quality by pressing
G
/
g
.
• When an FM stereo programme has static noise, press AUDIO until “Mono” appears. There will be no stereo
effect, but the noise will be reduced.
• If CATV is connected, FM Radio may not be able to be received.