Sony KDL-60R550A, Руководство по эксплуатации

Страница: 78 / 120

20
GB
Viewing 3D Video
You can experience powerful 3D (three-dimensional) entertainment, such as stereoscopic 3D video
games and 3D Blu-ray discs with this TV and a 3D-enabled device. Use an HDMI/MHL cable or a USB
cable to connect your TV to the 3D-enabled device.
Watching 3D content
The 3D display mode is automatically selected when a 3D signal is detected.
Press
3D and select “3D Display”, then press 3D to toggles between 3D display mode and 2D display
mode.
When the following non-3D pictures are displayed
1
Press 3D to display the 3D menu.
2
Select “3D Display”.
3
Press 3D repeatedly to toggle through “3D Display” modes.
“Simulated 3D”:
Displays regular 2D pictures in simulated 3D.
“Side-by-Side”:
Displays side-by-side pictures in 3D.
“Over-Under”:
Displays over-under pictures in 3D.
“Off”:
Displays pictures as they are.
4
Press RETURN to exit the 3D Menu.
• To see 3D contents, watch the TV with your eyes at the same level as the TV screen, and wear the supplied 3D
glasses.
• The 3D effect will be compromised and screen colour will shift if you watch the TV lying down, or with your head
tilted, or view from a wide angle.
• Additional viewers with 3D glasses can also enjoy 3D content.
• You can buy commercially available Passive Polarized Glasses for 3D TV as replacement glasses or extra
glasses. (You cannot use the Active Shutter 3D Glasses. Some theatrical glasses are not suitable for 3D TV.)
• The 3D function may not work properly, depending on the signal source or format.
• The display mode does not change to 3D mode automatically, depending on the signal source or format. In this
case, select 3D display mode manually.
• To prevent 3D display mode from being automatically selected when a 3D signal is detected, press HOME ,
then select “Settings” > “Picture” > “3D Settings” > “Auto 3D” > “Off’.
• Simulated 3D effect may be less pronounced with some picture sources.
• Perceived simulated 3D effect may vary from person to person.
• Simulated 3D display automatically switch back to 2D display mode an hour after its activation.
• “Side-by-Side”/“Over-Under” may not be selected, depending on the signal source or format.
Regular 2D picture Side-by-side picture Over-under picture