20
Remote Control Button Description
Button
Description
1
DISPLAY
Press once to display the banner with channel/program
information you are watching. The banner will time out in
about 10 seconds or press again to exit. You can select the
banner size based on the amount of information. See
Info
Banner
on page 52.
2
LIGHT
Press to light up the remote control buttons. The
FUNCTION
button indicator light will light up in red for
the device mode the remote control is operating and other
buttons will light up in blue (see page 51).
3
FUNCTION
Buttons
The
FUNCTION
button indicator lights up momentarily
when pressed to show which external equipment the remote
control is operating. These buttons can be programmed to
operate external equipment. You must first press one of
these
FUNCTION
buttons to operate the corresponding
equipment. See page 26 for “Programming the Remote Control”.
4
Equipment
Control/
BRAVIA
Sync
The buttons listed below can operate video equipment
programmed to the
DVD
,
AMP
, or
STB FUNCTION
buttons of the remote control. When the
TV FUNCTION
button is selected, the buttons can also be used to control
the connected equipment with the
Control for HDMI
function (not available on all
Control for HDMI
equipment). Some of the other buttons on the remote may
also operate
BRAVIA
®
Sync
TM
equipment.
.
PREV:
Press to replay the current program from the
previous chapter mark (if any) or from the beginning of the
live TV cache.
REPLAY:
Press to replay the current program for a set
period of time.
ADVANCE:
Press to advance forward a set period of
time when playing back a recorded program.
>
NEXT:
Press to advance forward to the next chapter
mark (if any) or to live TV when playing back a recorded
program.
m
(fast reverse):
Press to play a program in fast rewind
mode.
N
PLAY:
Press to play a program at a normal speed.
M
(fast forward):
Press to play a program in fast
forward mode.
X
PAUSE:
Press to pause playback.
x
STOP:
Press to stop playback.
SYNC MENU:
Press once to display the
Sync’d HDMI
Devices
(while a
Control for HDMI
device is not
selected). Select the HDMI device and then press
SYNC
MENU
to display the menu of connected equipment (not
available on all
Control for HDMI
equipment).
THEATER:
Press to turn on and off the
Theater Mode
.
The picture settings will be set for a cinema-like experience
and the audio will be switched to the audio output of the
attached speakers of your
BRAVIA
Sync audio system.
Your
BRAVIA
Sync audio system must be connected by an
HDMI connection to your TV (see page 37 for details).
5
SOUND
Press to cycle through different sound settings:
Dynamic
,
Standard
,
Clear Voice
. The sound modes can also be
accessed in the
Sound
settings. For details, see
Sound
settings on page 44.
6
DMe
x
Press to access features in the optional
BRAVIA
external
module (e.g. DMX-NV1). See your dealer or
www.sony.com/bravia for more information. The module
may not be available in all regions.
DI
S
PLAY
VOL CH
MUTING
REC
REC PAU
S
E REC
S
TOP
F2
F1
MENU
TOP MENU
BD/DVD
JUMP
DVD AMP
S
TB TV
PREV REPLAY
ADVANCE NEXT
THEATER
S
OUND PICTURE WIDE
CC FREEZE
LIGHT POWER
TV POWER
S
YNC MENU
PAU
S
E
PLAY
FUNCTION
S
TOP
1
2
3
4
5
6
~
• The
5
,
PLAY
and
CH+
buttons
have a tactile dot. Use them as a
reference when operating the TV.
