125
Other Inf
o
Othe
r Inf
o
Audio
Channels
Problem
Possible Remedies
Good picture, no sound
s
Press
MUTING
so that
Muting
disappears from the screen (see page 58).
s
Make sure the
Speaker
option is set to
On
in the Audio menu (see page 107).
s
(For KDL42XBR950 only) Make sure the
EXT SP
switch at the rear of the
display unit is set to
OFF
.
Audio noise
s
Communication problems may occur if the infrared communication equipment
(e.g., infrared cordless headphones) is used near the TV. Please use headphones
other than infrared cordless headphones. Also, if you use the infrared
communication equipment other than infrared cordless headphones, move the
infrared transceiver away from the TV until the noise is eliminated, or move the
transmitter and receiver of the infrared communication equipment closer together.
Cannot gain enough volume
when using a cable box
s
Increase the volume of the cable box using the cable box’s remote control. Then
press
FUNCTION
repeatedly until the TV indicator lights up and adjust the TV’s
volume.
Sound seems weak or
insufficient
s
The TV’s audio might be set to
Auto SAP
or
Mono
, when it might be better set to
Stereo
. In the Audio menu (see page 106), set the
MTS
setting to
Stereo
. If
already set to
Stereo
, switch to
Mono
(which may reduce background noise
during weak stereo broadcasts).
Cannot raise the volume on
external speakers
s
If the
Speaker
option is set to
Off
and the
Audio Out
option is set to
Fixed
(in
order to output the sound to your audio system) use your audio receiver to adjust
the sound (see page 107). Or, to use the remote control, set the
Audio Out
option
to
Variable
.
s
To turn on the TV’s speakers, set the
Speaker
option to
On
(see page 107).
Problem
Possible Remedies
Cannot receive upper channels
(UHF) when using an antenna
s
Press
ANT
to select the VHF/UHF input. (see page 58)
s
Use
Auto Program
in the Channel menu to add receivable channels that are not
presently in the TV’s memory (see page 110).
TV is fixed to one channel
s
Use
Auto Program
in the Channel menu to add receivable channels that are not
presently in the TV’s memory (see page 110).
s
Check your
Channel Fix
settings (see page 110).
Cannot receive any channels
when using cable
s
Use
Auto Program
in the Channel menu to add receivable channels that are not
presently in the TV’s memory (see page 110).
s
Press
ANT
to select the CABLE input. (see page 58).
Cannot receive or select
channels
s
Use
Auto Program
in the Channel menu to add receivable TV channels that are
not presently in TV’s memory (see page 110).
Some digital cable channels are
not being displayed
s
Certain cable companies have limitations on the broadcast of digital cable
channels. Check with your cable company for more information.
s
The digital cable channel may be set to
Hide
in the Digital Setup menu (see page
78).
