99
i.LINK
i.LINK Setup
You can use the i.LINK Control Panel to access digital setup options, some
of which are also available through the Digital Program Guide (described on
page 75).
To Do This ...
Do This ...
Set up the selected device
Press
V v B b
to highlight
Setup
and press
.
Set up Caption Vision
Once i.LINK Setup has been selected, Press
b
then
V
or
v
to
Caption Vision
, and
press .
For details about setting up Caption Vision, see “Using the
Caption Vision Menu” on page 77.
Set up i.LINK Analog Video
(Set-Top Box)
The TV is able to accept an analog signal from a selected set-top box. The set-top
box must be EIA-775A compliant and must be connected to the TV’s VIDEO 3
input. To associate the device with the TV's analog VIDEO 3 input, press
V
or
v
to
select to
Analog Video
and press
. All EIA-775A-compliant devices will be
shown in the list. Select the desired device from the list and press
.
Notes on i.LINK
s
The TV can act as an i.LINK repeater, so that i.LINK signals are relayed to another device even when
the TV is powered off. To enable this feature, set the
i.LINK Standby
option to
On
using the Setup menu
as described on page 118.
s
Parental Control settings apply to the signal from a selected device. For more details, see page 112.
