KDL-32EX655/40EX655/46EX655 29
SECTION 5 - UPDATES AND ADJUSTMENTS
SELECTING THE DESTINATION
The correct destination needs to be selected after replacing the Main Board.
CAUTION: Selecting the incorrect destination may require replacing the
Main Board.
Verify before proceeding to the next step:
;
Updated the Software
;
Selected the Segment Code
1.
Take the TV out of deep Standby mode by pressing
POWER
to
turn on the TV.
2. Press
POWER
to turn the TV back off.
3.
Access Service Mode by pressing the following buttons on the
Remote Commander within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
4. Press
2
to move to the next category until
002 MODEL
category
displays.
5. Press
1
to move to the next item until
001 DEST
item displays.
DIGITAL
SERVICE
002 MODEL
001 DEST
ISDB-LTN_BASE
6.
Using the table, press
3
to increase the data value or
6
to
decrease the data value, to select the correct destination of the
7. TV.
Model Name Code Name Data Value
Model Name Destination
Data Value
KDL-
-2A_BASE
KDL-32EX655
BRZ
ISDB-LTN_BASE
KDL-
-2A_BASE
KDL-40EX655
BRZ
ISDB-LTN_BASE
KDL-
-2A_BASE
KDL-46EX655
BRZ
ISDB-LTN_BASE
CAUTION: Verify the DESTINATION is set correctly before proceeding.
If the incorrect destination Data Value is selected, it may corrupt
the software requiring a Main Board replacement.
8. Press
MUTING
then
0
to WRITE (Save) the changes.
DIGITAL
SERVICE
002 MODEL
001 DEST
ISDB-LTN_BASE
WRITE
When complete, the screen briefly indicates the process is Done.
DIGITAL
SERVICE
002 MODEL
001 DEST
ISDB-LTN_BASE
DONE
9.
Proceed to
