Sony KDL-22EX355 страница 25 Скачать руководство пользователя

Страница: 25 / 46

KDL-22EX355/32EX355/40EX455

Components not identified by a part number or

description are not stocked because they are seldom

required for routine service.

The component parts of an assembly are indicated by the

reference numbers in the far right column of the parts list

and within the dotted lines of the diagram.

Items marked with an asterisk are not stocked since

they are seldom required for routine service. Expect

some delay when ordering these components.

NOTE: The components identified by shading

and

mark are critical for safety. Replace only

with part number specified.

NOTE: The components identified by a red outline and a

mark contain

confidential information. Specific instructions must be adhered to whenever

these components are repaired and/or replaced.

See Appendix A: Encryption Key Components in the back of this manual.

SECTION 4 - DISASSEMBLY/PART NUMBER INFORMATION

TABLE-TOP STAND AND REAR COVER REMOVAL

Gently place the LCD TV face down onto a soft cloth and remove 3 screws from the bottom of Table-Top Stand.

To avoid damaging the AC Power Supply Cord, remove the screw from the AC Cover and disconnect the AC Power

Cord.

REF. NO.

PART NO.

DESCRIPTION

[ASSEMBLY INCLUDES]

REF. NO.

PART NO.

DESCRIPTION

[ASSEMBLY INCLUDES]

4-438-330-01

REAR COVER (22IRST)

[2]

(KDL-22EX355 ONLY)

4-438-331-01

REAR COVER (32IRST)

[2]

(KDL-32EX355 ONLY)

4-438-332-01

REAR COVER (40IRST)

[2]

(KDL-40EX455 ONLY)

4-421-136-01

BRACKET, VESA (22IRST)

(KDL-22EX355 ONLY)

4-421-137-01

BRACKET, VESA (32IRST)

(KDL-32EX355 ONLY)

4-421-138-01

BRACKET, VESA (40IRST)

(KDL-40EX455 ONLY)

4-421-151-01

COVER, AC (IRST)

1-846-276-11

POWER SUPPLY CORD

X-2585-274-1

TABLE STAND ASSEMBLY (22IRST)

(KDL-22EX355 ONLY)

X-2585-275-1

TABLE STAND ASSEMBLY (32IRST)

(KDL-32EX355 ONLY)

X-2585-276-1

TABLE STAND ASSEMBLY (40IRST)

(KDL-40EX455 ONLY)

X-2584-211-1

BAG ASSEMBLY, SCREW

(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)

For product protection and safety reasons, Sony strongly recommends that

you use the screws provided with the TV.

CAUTION: These screws cannot be used to secure the TV to the Wall

Mount Brackets.

Remove the remaining screws from the Rear Cover.

Gently hold down the Rear Cover from the center,

then carefully lift the Rear Cover from the bottom.

Содержание KDL-22EX355















































Результаты поиска

Содержание KDL-22EX355

Отзывы:

Похожие инструкции для KDL-22EX355

Бренды по названию

Популярные бренды

Sony KDL-22EX355, Руководство по обучению обслуживанию

Результаты поиска

Содержание KDL-22EX355

Отзывы:

Похожие инструкции для KDL-22EX355

Бренды по названию

Популярные бренды