33
Usin
g TV
F
e
atu
res
Audio Options Settings
MTS
Enjoy stereo, bilingual
and mono programs
Stereo
For stereo reception when viewing a TV program broadcast in stereo.
Auto SAP
Automatically switches the TV to second studio programs when a
SAP signal is received. If no SAP signal is present, the TV remains in
Stereo
mode.
Mono
For mono reception. Use to reduce noise during weak stereo
broadcasts.
~
•
MTS
is available only for analog programs.
Speakers
TV Speakers
Select to use the TV speakers for audio.
Audio System
Select this option if you wish to use an external audio system for the
TV sound. By selecting this option you are disabling the TV speakers.
Audio Out
Easy control
of volume
adjustments
Fixed
Select to fix the audio output and allow you to adjust the volume with
your audio system’s remote control. (The TV’s remote control’s
VOLUME
and
MUTING
buttons have no effect on the
Audio Out
.)
Variable
Select to control the
Audio Out
’s volume and muting with your TV’s
remote control.
~
• Alternate Audio
feature is available only for digital programs. If the program you are watching is also available in
other languages from the audio tracks, and if that language is what you have selected in the
Language
setting, your
TV will automatically switch to the matching language with the
Alternate Audio
feature. The
Alternate Audio
option may be accessed by pressing the
OPTIONS
button on the remote control when alternate audio stream is
available from the broadcaster.
Channel Settings
Cable
On
For receiving cable channels via cable TV provider.
Off
For using an antenna.
~
• You should run
Auto Program
after changing the
Cable
setting.
Auto Program
Automatically sets up the channel list on the TV for all receivable channels. Channel
scanning will be based on the
Cable On
/
Off
setting.
1
Select
Auto Program
.
2
Select
OK
to start
Auto Program
. When
Auto Program
is completed, the screen
will display the number of channels found.
3
Press
RETURN
to exit the
Auto Program
.
~
• Running
Auto Program
will clear
Favorites
list.
• If you run
Auto Program
again, previously scanned channels will be overwritten with
the newly scanned channels.
(Continued)