37
Setup
Two VCRs for Tape
Editing
Connecting two VCRs lets you record from one VCR to the other. By
connecting them as shown below, you can view (monitor) what is being
recorded.
To connect two VCRs for tape editing
1
Use an A/V cable to connect the playback VCR’s A/V output jacks to
the recording VCR’s A/V input jacks.
2
Use an A/V cable to connect the recording VCR’s A/V output jacks to
the TV’s A/V input jacks (VIDEO 1 or 3).
Using S VIDEO jacks? See page 32.
S VIDEO
VIDEO
Y
P
B
P
R
L
R
L
R
Y
P
B
P
R
AUDIO
AUDIO
L
R
L
R
AUDIO
VIDEO IN
3
1
AUDIO
(VAR/F
SUB WOO
OUT
(VAR
HD/DVD IN
4
5
(MONO)
(1080i/720p/480p/480i)
Rear of Media Receiver Unit
Recording VCR
A/V cable
A/V cable
Playback VCR
When connecting two VCRs for tape editing;
– you cannot edit a tape with copy protection.
– do not connect the TV’s A/V input jack and output jack to
your VCRs at the same time to avoid looping the signal.
(Continued)
