Sony Ipela SNT-V704, Руководство по установке

Страница: 38 / 104

GB 8
Location and Functions of Parts and Controls
Location and Functions of Parts and
Controls
a
POWER indicator (green)
When the power is supplied to this unit,
this indicator lights up.
Refer to the User's Guide recorded in the
supplied CD-ROM for details of
Administrator menu settings.
b
NETWORK indicator (orange/
green)
The indicator flashes in orange when
this unit is connected to the 10BASE-T
network; it flashes in green when this
unit is connected to the 100BASE-TX
network.
The indicator goes off when this unit is
not connected to the network.
c
USB connectors
A commercially available USB flash
memory, etc. can be connected.
When connecting a USB hard disk drive,
use the drive to which the power source
is supplied from external equipment.
You cannot use a USB hard disk drive to
which the power should be supplied
from the USB port. The USB disk drive
must be formatted with the FAT file
format.
d
RS-232C connector (D-sub 9
pin)
Connects with VISCA RS-232C
connector of the camera(s).
1 2
1 12
13 24
RS-232C
I/O
SEE INSTRUCTION MANUAL CLASS 2 WIRING DC 12V
1 2 3 4
5 4 3 7 6
0 8 9 qa qs qf qd
Front/Side
Note