Pre
par
at
ion
Assigning the IP Address to the unit
9
If the information bar appears, click on the bar and select
Install ActiveX Control…
.
If “ Internet Explorer – Security Warning” appears, click
Install
.
The installation of ActiveX Control starts. When
installation is completed, the main viewer or the Motion
detection menu appears.
When accessing with Windows Vista or
Windows 7 in SSL communications
ActiveX control may not function properly. In such a
case, change the Internet Explorer settings.
1
Click Tool(T), Internet Option(O).
2
Select Security Tab.
3
Select
Trusted sites
in Security settings.
4
Click on
Sites(S)
.
5
Enter the address of the camera in
Add this Web
site to the zone
. Be sure to add the protocol
(https://).
6
Click
OK
to complete the setting.
Restart Internet Explorer when the above procedure is
completed and access the camera.
Configuring Windows Firewall
SNC toolbox or SNC audio upload tool may not operate
correctly depending on the configuration of Windows
Firewall. (No video network stations are shown in the
list even if they are detected.) In this case, confirm the
Windows Firewall configuration as follows:
Example: In case of SNC toolbox
1
Select
Control Panel
from the Start menu of
Windows.
2
Select
Security Center
of the working field.
3
Select
Windows Firewall
and select
Off
in the
Windows Firewall dialog.
The video network station will be displayed in the
list.
If you want to keep Windows Firewall
On
, continue
with the following steps.
4
Select the “Exceptions” tab.
5
Click
Add Program…
.
Program name
