A
d
mini
s
tra
ting
t
he
un
it
Setting the Camera Image and Audio — Camera Menu
38
Mic volume
When microphone input is selected, set the volume level
of the audio input from the microphone input connector.
It is adjustable from
-10
to
+10
.
Codec
Select the bit rate of audio from the microphone input
connector.
G.711 (64kbps)
,
G.726 (40kbps)
,
G.726
(32kbps)
,
G.726 (24kbps)
or
G.726 (16kbps)
can be
selected.
Note
If the bit rate is set to other than
G.711(64kbps)
, no
audio is output when you use Plug-in free Viewer.
Echo canceler
Select
On
to reduce echo from audio transmission.
Audio noise reduction
Select
On
to activate the Audio noise reduction filter.
Dynamic range compressor
Select
On
to activate the Dynamic range compressor.
Audio upload
Using SNC audio upload tool stored in the supplied
CD-ROM, you can output audio that is input to the
computer’s audio input terminal from a powered speaker
connected to the line output jack of the system.
Select
On
to output audio from the speaker.
Volume
Set the speaker volume level from
– 10
to
+ 10
.
OK/Cancel
See “Buttons common to every menu” on page 31.
Picture Tab
You can set the color condition, brightness, etc., of the
camera.
Display sample:
Visibility Enhancer
Using the Visibility Enhancer function makes the darker
part of the camera image brighter as well as auto-adjust
brightness and contrast to show bright parts clearly
without white out.
To use this function, select
High
,
Middle
or
Low
. If you
do not use this function, select
Off
.
XDNR
Image noise can be reduced by using the XDNR
function. The intensity of the Noise Reduction filter can
be selected among
High
,
Middle
and
Low
. If you do not
use this function, select
Off
.
Brightness
Adjust the brightness. A larger value brightens the
image, and a smaller value darkens the image. A value
from
–5
to
+5
can be set.
Saturation
Select the saturation in 7 steps, from
–3
to
+3
.
Selecting
+3
provides the highest image saturation.
Sharpness
Select the sharpness in 7 steps, from
–3
to
+3
.
Selecting
+3
provides the sharpest picture.
Contrast
Select the contrast in 7 steps, from
–3
to
+3
.
Selecting
+3
provides the highest contrast.
OK/Cancel
