A
d
mini
s
tra
ting
t
he
un
it
Configuring the System — System Menu
36
Initialize Tab
Reboot
Reboots the unit.
Click
Reboot
, and the message “This System will be
rebooted. Are you sure?” appears. Click
OK
to reboot
the unit.
Factory default
Resets the unit to the factory settings.
Restore network setting
When this item is checked, only the current network
settings will be retained after reset.
Click
Factory default
, and the message “Setup data will
be initialized. Are you sure?” appears. When you click
OK
, the network indicator on the unit starts to blink.
After adjustments of the default settings have finished,
the unit reboots automatically. Do not turn off the
camera until the unit reboots.
Tip
The unit can also be reset to the factory settings by
turning on the power of this unit while pressing the reset
button on the camera. For details, see the supplied
Installation Manual.
Backup setting data
Saves the setting data of the unit in a file.
Click
Save
, and follow the instructions on the Web
browser to specify the folder and save the setting data of
the unit. The file name preset at the factory is
“snt-ex104.cfg” for SNT-EX104.
Restore setting
Loads the stored setting data of the unit.
Click
Browse
and select the file in which the setting data
is stored. Click
OK
, and the system is adjusted
according to the loaded data, and restarted.
Restore preset position and privacy
masking settings
If you select this, the stored setting data of the camera,
the preset position data and the privacy masking data are
loaded.
Notes
• With
Restore setting
, some items in the Network
menu (page 41) cannot be restored.
• The following items cannot be stored or restored with
Backup setting data
or
Restore setting
.
– audio files uploaded using SNC audio upload tool
– a homepage created using Custom Homepage of
SNC toolbox
– a client certificate and CA certificate to be used in
the 802.1X authentication function
– Header logo
– superimpose logo
Format USB memory
Click
Format
to format the USB memory inserted into
the unit. The files and folders stored in the USB memory
are deleted while formatting.
Notes
• Before formatting, disable the image memory
function, FTP server function and Edge Storage
function to protect the USB memory from writing.
• Do not activate the
Format USB memory
function
when no USB memory is inserted into the USB
connector.
• USB memory cannot be used with the SNT-EP104,
SNT-EX154 and SNT-EP154.
Delete custom homepage
Click
Delete
to delete the homepages recorded in the
flash memory of the camera with Custom Homepage of
SNC toolbox (page 101).
Delete voice alert file
Click
Delete
to delete all the audio files stored in the
camera using SNC audio upload tool (page 106).
Notes
• Clicking
Delete
deletes all the stored audio files
simultaneously. To delete a specified audio file only,
perform deletion of the audio file in the corresponding
Voice alert tab of the Voice alert menu (page 77).
• Before deleting the audio file, set
Voice alert
to
Off
in
each tab of the Voice alert menu (page 77).
