Ad
minis
tra
ting t
he Camer
a
Action output Menu — Setting the Action output
58
Edge Storage still image
Recording data
You can refer to still image files recorded in the memory
card. These files will be saved in a folder tree as follows.
/sdcard/EdgeStoragePicture/00000000-999999999/
00000000-99999999/
(Prefix)YYYYMMDDhhmmss00000001.jpg
Path:
Displays the path name of the recording still
image file.
When you select a file, a still image will be
displayed.
Delete:
Click
Delete
to delete the selected folder or file.
If you select a folder, any files in the folder will also
be deleted.
Refresh:
Click
Refresh
to reload the latest data.
Recording target
Select the video codec mode you want to record.
For detailed settings of video codec mode, see the Video
codec tab in the Video / Audio menu.
Notes
• You can record still images even if the video is
specified with a codec set to H.264.
• Image quality setting for a still image can be changed
only when the codec is set to JPEG.
• If you want to change the image quality of recorded
still images, change the codec to JPEG.
• A folder containing no still image files may appear.
Image file name
The file name consists of three parts: a prefix, a file
number and an extension.
Set the prefix of up to 30 alphanumeric characters. You
can include - (hyphen) and _ (underscore) in the prefix.
The file number and extension are assigned
automatically by the camera.
The file number consists of the year (4 digits), month (2
digits), date (2 digits), hour (2 digits), minutes (2 digits),
seconds (2 digits), and a sequential number (8 digits).
The Greenwich Mean Time will be used in the file name.
The extension is .jpg.
Edge Storage movie
Recording status
Display the current recording status.
The recording status will not be updated until the screen
is refreshed.
Use the
Start Recording
and
Stop Recording
button to
start or stop the recording manually.
Notes
• When recording manually, do not set
Edge Storage
movie
in the Execution Condition tab of the Action
output menu to
Off
.
• Record the JPEG image of 20M as an Edge Storage
still image.
Recording target
Video:
Select the video codec mode you want to record.
For detailed settings of video codec mode, see the
Video codec tab in the Video / Audio menu.
Audio:
Set whether to record the audio signals input
from the camera.
Select the checkbox to record.
Note
Set
Audio sending
(page 29) in the Audio tab of the
Video / Audio menu to
Enable
.
Recording capacity
Displays the maximum recording time in the current
camera setting of the video mode, image size, bit rate
and frame rate.
Pre-alarm period:
Displays the maximum recording
time before the alarm is triggered.
Post-alarm period:
Displays the maximum recording
time after the alarm is triggered.
Note
Maximum recording time varies depending on the
image size and quality setting in the Video / Audio
menu.
Recording time
Set the recording time for the Pre-alarm image/audio
and Post alarm image/audio.
Pre-alarm period:
Type the recording time of the
image/audio before alarm detection.
Post-alarm period:
Type the recording time of the
image/audio after alarm detection.
HTTP alarm notification Tab
Set to notify a specified URL of an alarm when an event
is detected.
HTTP alarm notification 1, 2, 3
Set up to 3 recipients who you want to notify of the
alarm.
User name
Type the user name for authentication using up to 64
characters.
Содержание IPELA SNC-VM772R
Страница 3: ...Table of Contents 3 Others Glossary 64 Index 66 ...
Страница 68: ...Sony Corporation ...
