Sony IPELA SNC-VM772R Скачать руководство пользователя страница 47

Страница: 47 / 68

Ad
minis

tra

ting t

he Camer

Action input Menu — Setting the Sensor input/Camera tampering detection/Motion detection

You can set the inspection methods to execute
independently. Intrusion and Passing can also be set to
execute in combination.
For example:
• An alarm sounds when an object enters areas A, B and

• An alarm sounds when an object passes through area

A and enters area B.

• An alarm sounds when an object passes through areas

A and B, and enters area C.

• An alarm sounds when an object enters area A, and

passes through area B.

Intrusion

When a moving object enters the designated area, an
alarm sounds.

Passing

A passage line is determined, and when a moving object
passes the setting line, an alarm sounds.

Existing

Alarm will be triggered if the moving object that broke
in remains within the set area for specified duration.

Disappearance

Alarm will be triggered if the moving object that broke
in disappears from the set area.

Capacity

Alarm will be triggered if the number of moving objects
that broke in is more than the specified capacity.

Left object

When a moving object has been left in the designated
area, an alarm sounds.

Removed object

When a moving object has been removed from the
designated area, an alarm sounds.

Notes

• Before actual use, perform an operation test and

confirm that the motion detection function works
correctly.

• When the privacy masking is used, detection is not

performed in the masked area.

• If the Wide dynamic range is selected, settings other

than left/removed are available as VMF filters.

Setting items for motion detection

Use the settings tab to set the conditions for the motion
detection function while observing camera images.

VMD settings

VMD stands for Video Motion Detection.

Detection area

Specify the effective scope of motion detection.

Note

The frames shown on the monitor screen are not
displayed on the image files sent or recorded with
motion detection.

Configuring the detection area

The following procedure is used to configure the motion
detection area:

Use the following buttons to specify the active
area(s) and inactive area(s).

Monitor screen

Setting item list

Setting area

Содержание IPELA SNC-VM772R





































































Результаты поиска

Содержание IPELA SNC-VM772R

Отзывы:

Похожие инструкции для IPELA SNC-VM772R

Бренды по названию

Популярные бренды

Sony IPELA SNC-VM772R, Руководство пользователя

Результаты поиска

Содержание IPELA SNC-VM772R

Отзывы:

Похожие инструкции для IPELA SNC-VM772R

Бренды по названию

Популярные бренды