A
d
mini
s
tra
ting
t
he
Came
ra
Saving the Camera Position — Preset position setting Menu
66
Image memory and Alarm output notification will not
work. Make sure to close Motion detection setting
menu after setting.
• Before using the Motion detection, perform the
operation test to confirm correct operation.
• The Motion detection may not operate correctly in the
following cases:
– while changing a setting on the Camera setting
menu
– when the object is dark
– when the camera is installed in an unstable place
that causes vibration to the camera
– when a small bit rate (64 kbps, 128kbps) is selected
in
Bit rate
setting of MPEG4
Saving the Camera
Position
— Preset position
setting Menu
When you click
Preset Position
of the Advanced mode
menu, the preset position setting menu is displayed. In
this menu, PanTilt and Zoom position can be saved up to
8 items, and the home position the camera faces to can
be saved when the power is turned on.
Preset
Preset No.
Select a preset number from 1 to 8 in the list box.
Recall
: When you click
Recall
, the camera moves to the
position of the selected preset number at present.
Set
: Use it to save the camera position to a preset
number.
Carry out the following steps.
1
Move the camera to the position to be saved while
you are checking the image with the main viewer.
2
Select a preset number for saving, and write the
preset position name.
3
Click the
SET
.
The camera position is saved.
Reset
: When you press
Reset
, deletes the saved contents
of the current selected preset number.
Preset position name
Write the preset position name of the selected preset
number.
Position at alarm
The camera can synchronize the preset position with
Sensor input 1 or 2 or with the activity detection
function.
