A
d
mini
s
tra
ting
t
he
Came
ra
Setting the Schedule — Schedule setting Menu
63
Stay time
Set the stop time in each preset position (1 to 3600
seconds).
Speed
Select the moving speed from the list box.
The value is higher, the moving speed is faster.
Sequence
Select and set the preset number
1
to
8
for each of 8 list
boxes.
The camera moves to the preset position saved in the
selected preset number sequentially. The sequence of
camera movement starts from the preset position
specified in the list boxes from left to the right. The
camera stops when it moves to the right most.
If you select
End
in the list box, the program ends before
it and the camera stops.
Preset position table
The programmed preset position names are displayed.
OK/Cancel
See “Buttons common to every setting menu” on page
34.
Setting the Schedule
— Schedule setting Menu
When you click
Schedule
on the Advanced mode menu,
the Schedule setting menu appears.
This is the same menu as the setting menu which is
displayed when you click
Schedule
to set Effective
period and Schedule in FTP client setting menu, e-Mail
(SMTP) setting menu, Image memory setting menu,
Alarm out setting menu and so on.
Example: When setting e-Mail (SMTP) (the alarm
sending) in the Schedule setting menu
Schedule selection
Select the list box to specify the schedule you want to
set.
e-Mail (SMTP) – Alarm
,
e-Mail (SMTP) –
Periodical
,
FTP – Alarm
,
FTP – Periodical
,
Image
memory – Alarm
,
Image memory – Periodical
,
Alarm output – Alarm
or
Alarm output – Timer
, can
be selected.
Mon (Monday) to Sun (Sunday)
The time period on the right of the checked day is the
effective period of the schedule.
Start time, End time
Specify the
Start time
and the
End time
.
Use the same time schedule every day
When this is checked, the
Start time
and
End time
set
to
Mon
(Monday) are applied to all days. In this case,
the
Start time
and
End time
of the other days than
Mon
(Monday) cannot be input.
OK/Cancel
