O
per
at
ing
t
he
Came
ra
Controlling the camera on a panorama image
25
Note
When the specified area is zoomed in, the center may be
shifted or some portion of the image may appear out of
the monitor image section. In this case, click the point
you want to move to the center or click the arrow button
on the image control section.
Zoom an image by the camera
zoom bar
When you can control this function, the zoom bar is
displayed below the window.
You can specify a location to be zoomed by clicking the
zoom bar.
The zoom bar is displayed /not displayed by clicking the
icon below the image frame.
WIDE marge icon:
Click to move the zoom to the
WIDE Merge (the same magnification).
TELE marge icon:
Click to move the zoom to the
TELE Merge (3-fold magnification).
Turning off the zoom bar
When you are not going to use the zoom bar, click
under the panorama window to turn off the
panorama window, then click it again to turn off the
zoom bar.
Moving the camera to the preset
position
Select the preset position name from the PRESET list
box. Then, the camera will move to the preset position
that you have stored in memory at “Preset position
setting Menu”.
Controlling the camera
on a panorama image
When you have the authorization to control the camera,
the panorama window is displayed under the monitor
window.
In the panorama window, a 360° view around the camera
is displayed as a panorama image. When you click on
the displayed panorama image, the camera faces the
clicked area.
To create the panorama image
Create the panorama image with the supplied “SNC
panorama creator”. Refer to page 80 for details.
Tip
The panorama image is the still image converted from
the image taken when you were going to create a
panorama image with “SNC panorama creator”. When
the camera is moved or when the layout around the
camera is changed, create the panorama image again.
Monitor window
SNC-P5
panorama window
