Ot
her
s
Using the SNC toolbox
100
Client certificate
Displays the name of the client certificate used for SSL
function.
Model
Displays the model name.
Serial No.
Displays the serial number.
Version No.
Displays the version of firmware.
Admin name
Displays the administrator user name.
IP Address of NIC (Search result folder only)
Displays the IP address of the NIC (Network Interface
Card) detected.
Tips
• A camera with which SSL communication has been
performed will show
on the left side of its IP
address.
• The model on sale in China does not support the SSL
function.
View button
You can change the display format of the Device list
(page 101).
Registering in My device
The device tree has three folders by default:
Search
result
,
Error
and
My device
.
The
Search result
folder and
Error
folder are fixed, so
you cannot edit the content or rename the folder.
The
My device
folder can be renamed, and you can add,
delete and move folders.
Search result folder
Displays devices detected by search.
Error folder
Displays devices that are not connected.
My device folder
You can sort and manage devices using any folder.
Adding a folder
1
Select the parent folder to which you want to add a
folder.
2
Right click the mouse and select
Add Folder
from
the displayed menu.
A folder is added. Enter a folder name of your
choice.
Registering a device
To register a device, follow the procedure below:
• Registering by
Add Device Entry
dialog
• Registering by drag & drop
• Registering by copy & paste
Registering by Add Device Entry dialog
1
Select the folder to register the device.
2
Right click the mouse and select
Add Device Entry
from the displayed menu.
The
Add Device Entry
dialog appears.
3
Enter the following items:
Device name:
Enter a device name of your choice.
Device address:
Enter the address of the device to
register. Normally, select
Single device
. If there is
more than one camera in the specified IP address
range then select
Multi device
.
HTTP port No.:
Normally, 80 should be selected.
When setting a value other than 80, select the
textbox and enter a port number.
HTTPS port No.:
Normally select 443. When
setting a value other than 443, select the textbox
and enter a port number.
Protocol:
Select communication protocol
HTTP
or
HTTPS
.
Client certificate:
Set when using the client
authentication of the SSL function.
Activated when
HTTPS
is selected.
