O
per
at
ing
t
he
Came
ra
Recording a Still Image in the Built-in Memory of the Camera / Controlling Alarm output
23
Recording a Still Image
in the Built-in Memory of
the Camera
You can capture a camera image as a still image and
record it in the built-in memory of the camera.
To use this function, you need to make
Image memory
active and set details of the image memory in the trigger
setting menu on the Administrator menu (page 50).
1
Monitor the image on the monitor window.
2
Select
Image memory
from the Trigger list box.
3
Click
Trigger
icon.
The still image of the moment you click is captured,
and the image file is recorded in the built-in
memory of the camera.
Controlling Alarm output
You can control the Alarm output On (short-circuit) and
Off (open).
To use this function, you need to make
Alarm output
active in the Trigger setting menu on the Administrator
menu (page 50).
1
Monitor the image on the monitor window.
2
Select
Alarm output 1
or
Alarm output 2
from the
Trigger list box.
3
Click
Trigger icon.
Each click switches the Alarm output between On
(short-circuit) and Off (open) alternately.
Tip
For the connection of peripheral devices to the Alarm
output of the I/O port, see the supplied Installation
Manual.
