A
d
mini
s
tra
ting
t
he
Came
ra
Recording Images in Memory — Image memory Menu
60
Alarm recording Tab — Setting the
Image memory function when
detecting the alarm
You can set to record the image and audio file to the
memory linked with the external sensor input or with the
built-in object detection function.
Alarm recording
Select
On
to record the image and audio file in the built-
in memory or ATA memory card, linked with alarm
detection.
Image file name
Type the file name you want to assign to the images to
be recorded. You can use up to 10 alphanumeric
characters, - (hyphen) and _ (underscore) for naming.
Suffix
Select a suffix to be added to the file name.
Date & time:
The Date & time suffix is added to the
image file name.
The Date & time suffix consists of lower two-digits
of the year (2 digits), month (2 digits), date (2 digits),
hour (2 digits), minute (2 digits), second (2 digits)
and consecutive number (2 digits), thus adding a 14-
digit number to the image file name.
Sequence number:
A consecutive number of 10 digits
between 0000000001 and 4294967295 and an
consecutive 2 digits number is added to the image
file name.
Tip
A consecutive number added to
Date & time
and
Sequence number
is used to identify each of the
multiple files created with consecutive alarm events.
Sequence number clear
Click
Clear
to reset the
Sequence number
suffix to 1.
Alarm
Select the alarm to be linked with the recording of image
and audio files.
Sensor input 1:
The external sensor that is connected to
sensor input 1 of the camera I/O port.
Sensor input 2:
The external sensor that is connected to
sensor input 2 of the camera I/O port.
Object detection:
The alarm by the object detection
function.
Click
Detection
, and the Object detection menu is
displayed to allow you to set the object detection
function (page 69).
Effective period
Set the period during which alarm detection is effective.
Always:
The alarm detection is always effective.
Schedule:
You can specify the period during which
alarm detection is effective.
Click
Schedule
and the setting menu for the effective
period is displayed. (“Setting the Schedule —
Schedule Menu” on page 67)
Alarm buffer
Select
Use alarm buffer
when you record the image/
audio of before and after alarm detection (pre-alarm,
post-alarm).
If you do not select the alarm buffer, only the image at
the moment of the alarm detection is recorded.
Click
Alarm buffer
to display the Alarm buffer menu.
For details, see “Setting the Alarm Buffer — Alarm
buffer Menu” on page 68.
Note
This setting becomes invalid and a still image is
recorded if
H.264
is selected in the Video codec tab of
the Camera menu.
OK/Cancel
