A
d
mini
s
tra
ting
t
he
Came
ra
Configuring the Network — Network Menu
42
WPA and WPA2 use TKIP and AES encryption
systems. This unit supports TKIP for WPA, and AES for
WPA2.
Authentication
Select the authentication method.
PSK:
Select for PSK authentication. When this option is
selected,
Passphrase
setting is required.
EAP:
Select for EAP authentication. When this option
is selected, enabling the 802.1X function is required.
After selecting
EAP
, click
OK
at the bottom of the
window. Then the 802.1X (wireless) function is
enabled.
Note
For correct operation of the 802.1X function, you need
to configure the 802.1X settings, such as certificate
setting, appropriately. For details on the 802.1X settings,
see “Using the 802.1X Authentication Function —
802.1X Menu” on page 44.
802.1X
This button is active when
EAP
is selected on
Authentication
.
When you click
802.1X
, the 802.1X menu appears,
allowing you to configure the 802.1X (wireless)
function.
Passphrase
Set a passphrase when
PSK
is selected on
Authentication
.
Type 8 to 63 ASCII characters (alphanumeric), or up to
64 hexadecimal digits (0 to 9 and A to F).
Re-type passphrase
To confirm the passphrase, retype the passphrase that
you typed in the
Passphrase
box.
OK/Cancel
See “Buttons common to every menu” on page 27.
Dynamic IP address notification
Tab — Notifying the IP Address
When
Obtain an IP address automatically (DHCP)
is
selected in the Network tab or Wireless tab, you can
send notification of completion of the network settings
using the SMTP or HTTP protocol.
e-Mail (SMTP) notification
Select
On
to send an e-mail when the DHCP setting is
completed.
SMTP server name
Type the name or IP address of the SMTP server for
sending an e-mail, using up to 64 characters.
Authentication
Select the authentication required when you send an e-
mail.
Off:
Select if no authentication is required when an e-
mail is sent.
On:
Select if authentication is required when an e-mail
is sent. Select one of the authentication methods
from the following and specify the
POP server
name
,
User name
and
Password
as required.
SMTP:
Select when SMTP authentication is
required.
POP before SMTP:
Select when POP before SMTP
authentication is required.
Note
When you set
Authentication
to
On
, make sure to select
either or both
SMTP
or/and
POP before SMTP
.
POP server name
It is necessary when
POP before SMTP
is selected for
Authentication
.
Type the POP (receiving mail) server name using up to
64 characters. Or type the IP address of the POP server.
This setting is necessary when the SMTP server that
