A
d
mini
s
tra
ting
t
he
Came
ra
Setting the SSL function — SSL Menu
59
<HTTPPORT>
Use this tag to embed the specified HTTP server port
number in the text or parameters.
<MACADDRESS>
Use this tag to embed the MAC address of the interface,
whose IP address was acquired by DHCP, in the text or
parameter.
<MODELNAME>
Use this tag to embed the camera’s model name in the
text or parameter.
<SERIAL>
Use this tag to embed the camera’s serial number in the
text or parameter.
Setting the SSL function
— SSL Menu
When you click
in the Administrator menu, the
SSL menu appears.
Use this menu to configure the SSL or TLS function.
(called “SSL” hereafter)
The settings allows the camera to communicate with the
client PC by using SSL.
SSL menu consists of the
Common
tab and
CA
certificate
tab.
Notes
• The model on sale in China does not support the SSL
function.
• When using the SSL function, always configure the
settings after setting the date and time of the camera.
If the date and time are not correctly set, it may cause
browser connection problems.
Common tab
SSL function
On:
Select this to use the SSL function. When
Allow
HTTP connection for some clients
is selected, both
HTTP and SSL connections are allowed. When
Allow HTTP connection for some clients
is not
selected, only SSL connection is allowed.
When Internet Explorer 6 is used
When SSL session is established,
appears in the
status bar on your web browser.
When Internet Explorer 7, Internet Explorer 8 or
Internet Explorer 9 is used
When SSL session is established,
appears in the right
of the address bar on your web browser.
Off:
Select this to not use the SSL function. Only HTTP
connection is allowed with the camera.
SSL
