A
d
mini
s
tra
ting
t
he
Came
ra
Configuring the Network — Network Menu
57
Down
Decreases the priority of the rule.
Select a rule from the QoS table to lower its priority and
click
Down
.
QoS table
Displays the list of registered QoS information. If
multiple conditions match, the rule with the smallest
number has priority.
Tip
To attain QoS of data traffic, the target device must be
connected to a router or switch that supports the QoS
function.
OK/Cancel
See “Buttons common to every menu” on page 33.
Dynamic IP address notification
Tab — Notifying the IP Address
When
Obtain an IP address automatically (DHCP)
is
selected in the Network tab or Wireless tab, you can
send notification of completion of the network settings
using the SMTP or HTTP protocol.
e-Mail (SMTP) notification
Select
On
to send an e-mail when the DHCP setting is
completed.
SMTP server name
Type the name or IP address of the SMTP server for
sending an e-mail, using up to 64 characters.
SMTP port number
Enter a port number from 25 to 65535.
The standard port number is 25. If TLS is enabled, the
standard port number for SMTPs is 465.
Use TLS
To use the encryption function by TLS, set to
On
.
Note
The model on sale in China does not support the TLS
function.
STARTTLS
To use the encryption function by STARTTLS, set to
On
.
Note
The model on sale in China does not support the
STARTTLS function.
Authentication
Select the authentication required when you send an
e-mail.
Off:
Select if no authentication is required when an
e-mail is sent.
On:
Select if authentication is required when an e-mail
is sent. Select one of the authentication methods
from the following and specify the
POP server
name
,
User name
and
Password
as required.
SMTP:
Select when SMTP authentication is
required.
POP before SMTP:
Select when POP before SMTP
authentication is required.
Note
When you set
Authentication
to
On
, make sure to select
either or both
SMTP
or/and
POP before SMTP
.
POP mode
Select POP3 or APOP as the authentication method for
POP authentication.
Note
The model on sale in China does not support the APOP
authentication.
Wait time after POP
Set the waiting time in
POP before SMTP
before
SMTP authentication after POP authentication is
completed. Timeout can be set from 0 to 10,000 msec.
