Pre
par
at
ion
Assigning the IP Address to the Camera
10
Configuring Windows Firewall
SNC toolbox or SNC audio upload tool may not operate
correctly depending on the configuration of Windows
Firewall. (No cameras are shown in the list even if they
are detected.) In this case, confirm the Windows
Firewall configuration as follows:
Example: In case of SNC toolbox
1
Select
Control Panel
from the
Start
menu of
Windows.
2
Select
Security Center
of the working field.
3
Select
Off
in the Windows Firewall dialog.
The camera will be displayed in the list.
If you want to keep Windows Firewall
On
, continue
with the following steps.
4
Select the
Exceptions
tab.
5
Click
Add Program…
.
6
In the Add Program dialog, select SNC toolbox and
click
OK
.
SNC toolbox is added to the Programs and Services
list.
7
Click
OK
.
When the above procedure is completed, the
camera connected in the local network are
displayed in SNC toolbox.
