27
Specifications
Specifications
Video signal
1080i/59.94, 1080i/50
Synchronization
Internal synchronization
Image device 1/3 type (6 mm), CMOS
Effective picture elements:
Approx. 2,000,000 pixels
Lens
10× (optical) (40× (digital))
f = 3.4 – 33.9 mm, F1.8 – F2.1
Horizontal angle: 8 (TELE end) to
70 degrees (WIDE end)
Minimum object distance
100 mm (4 inches) (WIDE end)
Minimum illumination
15 lux (F1.8) with 50 IRE
Pan/tilt action Horizontal: ±100 degrees
Maximum panning speed: 300
degrees/sec.
Vertical: ±25 degrees
Maximum tilting speed: 125
degrees/sec.
Input voltage 19.5 V DC
Current consumption
1 A max.
Operating temperature
5ºC to 35ºC (41ºF to 95ºF)
Storage temperature
–20ºC to +60ºC (-4ºF to 140ºF)
Dimensions
240 × 152 × 173 mm (10 1/4 × 6 ×
6 3/4 inches) (w/h/d) (including
the feet)
Mass
Approx. 2 kg (4 lb 7 oz)
Installation angle
Less than ±15 degrees to the
horizontal surface
Supplied accessories
Camera cable (3 m) (9.8 ft) (1)
Hook-and-loop pads (2 sets)
Operating Instructions (1)
Warranty booklet (1)
Design and specifications are subject to
change without notice.
Pin assignments
VISCA OUT connector (mini DIN 8-
pin, female)
TERMINAL connector (D-sub, 15-pin)
Note
Always verify that the unit is operating
properly before use. SONY WILL NOT
BE LIABLE FOR DAMAGES OF ANY
KIND INCLUDING, BUT NOT
LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT
OF THE LOSS OF PRESENT OR
PROSPECTIVE PROFITS DUE TO
FAILURE OF THIS UNIT, EITHER
DURING THE WARRANTY PERIOD
OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER
REASON WHATSOEVER.
Pin No.
Function
1
DTR OUT
2
DSR OUT
3
TXD OUT
4
GND
5
RXD OUT
6
GND
7
No connection
8
No Connection
Pin No.
Function
1
Y-OUT
2
Y-GND
Содержание IPELA PCSA-CXG80
