Sony Ipela PCS-XC1 Скачать руководство пользователя страница 60 | Manualshive

Страница: 60 / 190

Sony Ipela PCS-XC1 Скачать руководство пользователя страница 60

60

Registering Local Information

SSH Access

Allows you to select whether to permit
access to the unit via SSH (Secure Shell).

Enabled:

Permits access via SSH.

Disabled:

Prohibits access via SSH

Other

Use History

Select whether to display the history lists in
order to use for dialing, etc.

On:

Displays the history lists.

Off:

Does not display the history lists.

Save Setup

Saves the data for each setting to a USB
storage device. The data for each setting
saved on the USB storage device is
overwritten.

• Phone Book and History data are not saved.
• Do not connect small USB devices to the

USB port on the front of the unit, as they may
become impossible to remove. Connect
small devices to the USB port on the rear of
the unit.

Load Setup

Loads the data for each setting from a USB
storage device. The data for each setting
saved on the unit is overwritten.

• When saving and loading settings, make sure

that the version of the system from which the
data was originally saved is the same as the
version of the local system. If the versions
differ, the data may not be properly
recognized.

• Do not connect small USB devices to the

USB port on the front of the unit, as they may
become impossible to remove. Connect
small devices to the USB port on the rear of
the unit.

AMX Device Discovery

Select whether to export AMX Device
Discovery information onto the network.

Off:

Disables this function.

On:

Enables this function.

When the AMX system is connected to the
unit via serial connection, AMX Device
Discovery information is output via that
serial connection.
AMX systems are external control devices
that can be used to control the unit. When the
AMX system receives Device Discovery
information from the unit, the unit
automatically falls under the control of the
AMX system.

HOP

Enter a number from 0 to 255 as the HOP
Display Terminal Name.

Internet Protocol

IPv4:

Uses the internet protocol version 4

(IPv4) that is commonly used.

IPv6:

Uses the next-generation internet

protocol version 6 (IPv6).

When “Internet Protocol” is set to “IPv6”,
some of the functions of this system are
restricted, and some of the Administrator setup
menus are not displayed.

For details, see “Restrictions on the Use of
IPv6” on page 68.

Phone Book

Do not connect small USB devices to the USB
port on the front of the unit, as they may
become impossible to remove. Connect small
devices to the USB port on the rear of the unit.

Save Phone Book

Allows you to save the data in the Phone
Book on a USB storage device. The data
already stored on the USB storage device is
overwritten.

Load Phone Book

Allows you to load the data in the Phone
Book from a USB storage device. The data
already stored in the Phone Book is
overwritten.

Notes

Notes

Administrator4

Note

Note

Administrator5

«
...
58
59
60
61
62
...
»

Содержание Ipela PCS-XC1































































































































































































Отзывы:

Нет отзывов