170
Starting a Multipoint Videoconference
5
Repeat steps 2 and 3 to call other remote parties.
To call the second and other remote parties not registered in the
One Touch Dial list
When you press the CONNECT/DISCONNECT (
/
) button on the
Remote Commander, the submenu in step 3 appears. Select “Phone Book” to
open the Phone Book, or “Detailed Dial” to open the List Edit menu.
Perform steps 1-4 of the procedure shown in “Calling Remote Parties by
Selecting from the Phone Book” on page 171 or steps 1-4 of the procedure in
“Calling Remote Parties not Registered in the Phone Book” on page 172
depending on the registration status of each remote party.
1
Select the multipoint connection list registered in the Phone Book.
The multipoint connection lists are marked with “
”.
2
Press the CONNECT/DISCONNECT (
/
) button on the Remote
Commander, or press the ENTER button to display the submenu, press the
V
or
v
button to select “
Dial”, then press the ENTER button.
Calling Remote Parties Registered in the Multipoint Connection
Lists
1st remote party
2nd remote party
Picture on the local site
Содержание Ipela PCS-TL50
Страница 283: ...Sony Corporation ...